Skip to content
A marketing service, not a licensed contractor. Metal roofing work is performed by independent licensed local contractors.

Metal roofing services

Every page below explains one piece of a Wyoming metal roof in plain terms, with the wind and fastening details that matter here, then offers a free quote from an independent local roofer.

How the five fit together

Every metal roof question in this state eventually reduces to wind, whether it starts in Casper, Cheyenne, or Jackson. Wyoming ranks first in the US in annual average wind speed at 12.9 mph per the Wyoming Climate Atlas from the State Climate Office, and with no statewide building code (code adoption runs city by city and county by county, per the International Code Council's Wyoming adoption page), each county publishes its own design wind value. So the service pages share one spine. Standing seam metal roofing covers the panel and seam choice; wind-rated roof systems covers the tested uplift ratings and county numbers that choice answers to; metal roof installation covers the sequence and permits that make the spec real. Replacement and repair apply the same logic to roofs already up. The wind-uplift pillar, with every cited figure in one place, is the Wyoming metal roofing guide.

Match the page to your situation

Your situation Start here
Choosing a system for a new roof or a switch to metal Standing seam, then wind-rated systems
Pricing the full project, permits and sequence included Metal roof installation
Metal already on the roof, aging or storm-worn Metal roof replacement
Loose panels, lifted trim, or a leak after a gust Metal roof repair
Still researching the whole decision The Wyoming metal roofing guide
Ready for bids in your town Get a free quote, or find your town under service areas

Not sure where to start? Get a free quote and describe the situation, read how we make money for the referral mechanics, or see about us for how every claim on these pages gets sourced.

What it costs, and what happens after you send it

What does a metal roof cost in Wyoming?
The honest answer is qualitative, because no Wyoming-wide published figure meets this site's sourcing bar: a five-figure project on most homes, standing seam above exposed fastener. For calibration, Western States Metal Roofing publishes national installed ranges of $10 to $16 per square foot for standing seam and $7 to $12 per square foot for corrugated exposed fastener (manufacturer-published). Roof size, pitch, panel and gauge, wind detailing, tear-off and site access move any bid, so treat a precise local number as the bidder's to justify. The Wyoming guide collects the city figures Wyoming contractors publish.
How fast will someone get back to me?
Calls and form submissions reach Compass Camper LLC directly. We read the request and pass it to an independent local metal roofing contractor, usually within about an hour during the day. That contractor then contacts you to look at the roof and price the work on their own schedule.
What work is covered?
New metal roof installation, replacing an existing roof with metal, standing seam systems, wind-rated roof systems, and metal roof repair. See every service.

Only the independent contractor we send your request to can price your actual roof. Compass Camper LLC does not perform roofing work and does not quote it.

Questions homeowners ask

Which metal roofing service page should I start with?
Match the page to the decision in front of you. Choosing a system for a new roof, start with standing seam and wind-rated systems. Pricing the whole project, installation. An aging or storm-worn metal roof points to replacement, and loose panels, lifted trim, or a leak after a gust points to repair. Still orienting? The Wyoming metal roofing guide covers the full picture on one page.
Does the referral service cost anything?
No. The quote is free to the homeowner, and it stays free because the independent professional pays a referral fee when a homeowner connects through this site. That fee does not change your price, and it does not make any roofer endorsed by us. You compare bids and make the hire yourself; the how we make money page spells out the whole arrangement.
Do these services cover my part of Wyoming?
The service pages apply statewide, because the physics and the rules do. The city pages cover Casper, Cheyenne, Laramie, Gillette, Sheridan, and Jackson, the state’s larger markets, and each names its building office and licensing rules. Outside those towns the same checks apply, with your county building office holding the local design values. Send the form with your town either way.

Updated

Call (307) 298-6829